Product Description
The PushLoc suction toilet roll holder, uses an innovative suction system. No tools are required for installation as the toilet roll holder adheres to a smooth, flat and dry surface. One push assembly – clean and dry the wall surface and push the accessory to attach. No tools are needed! To release and remove, gently insert a credit card or similar thin piece of plastic between the suction pad and the wall surface. No ugly holes or marks are left behind. The collection is made from chrome-plated stainless steel therefore ensuring the accessories are rust-resistant. The square and prominent suction pad design allows a contemporary look to Bathroom accessories. Each suction pad has a double edge ring which increases the holding power and staying time of the accessory, making it stronger than most other suction products on the market. The suction pads have a tight grip on smooth surfaces like glass or tiles. Unlike other systems, your Pushloc product will let you know when to re-apply. As soon as the red line indicator starts to show, simply press the button to re-apply the product until the red line has gone. Please check the chart in the images to make sure you have the correct surface for this accessory. Please Note: The Self Adhesive Square is not recommended for wood, painted or wallpaper surfaces. Dimensions: 11cm (h) x 13cm (w) x 6cm (d) x1 Pushloc Adhesive Mounting Disc included *Please note all suction accessories should be mounted away from direct line of water Height 11cm Width 13cm Depth 6cm Wipe clean only. 52% Plastic, 48% Stainless steel.
The PushLoc suction toilet roll holder, uses an innovative suction system. No tools are required for installation as the toilet roll holder adheres to a smooth, flat and dry surface. One push assembly – clean and dry the wall surface and push the accessory to attach. No tools are needed! To release and remove, gently insert a credit card or similar thin piece of plastic between the suction pad and the wall surface. No ugly holes or marks are left behind. The collection is made from chrome-plated stainless steel therefore ensuring the accessories are rust-resistant. The square and prominent suction pad design allows a contemporary look to Bathroom accessories. Each suction pad has a double edge ring which increases the holding power and staying time of the accessory, making it stronger than most other suction products on the market. The suction pads have a tight grip on smooth surfaces like glass or tiles. Unlike other systems, your Pushloc product will let you know when to re-apply. As soon as the red line indicator starts to show, simply press the button to re-apply the product until the red line has gone. Please check the chart in the images to make sure you have the correct surface for this accessory. Please Note: The Self Adhesive Square is not recommended for wood, painted or wallpaper surfaces. Dimensions: 11cm (h) x 13cm (w) x 6cm (d) x1 Pushloc Adhesive Mounting Disc included *Please note all suction accessories should be mounted away from direct line of water
Height 11cm
Width 13cm
Depth 6cm
Wipe clean only.
52% Plastic, 48% Stainless steel.